Bitte deaktivieren Sie Ihren AdBlocker für unsere Webseite.
Wir sind auf Werbeeinnahmen angewiesen, um dieses Projekt aufrecht halten zu können. Oder unterstützen Sie uns mit einer kleine Spende.
Welche modeljahre haben Sie und welche buchstabe modulen haben Sie und kalibreert ?
Coderen Side Assist / Lane Change:
Stap 0:
Module 19: Gateway
Toevoegen 3C - Lane Change.
Save coding.
Module 19: Gateway
Adaptions:
Installation list, Specief installations
Lane Change Assist: not coded > coded.
Stap 1:
Module 03: ABS Brakes
coding: Byte 29, Bit 7:
Side Assist Rear Cross Traffic Alert, 0 > 1.
Byte 29 bit 7 is gewoon de codering in 03 voor de parkeerhulp. (RearCrossTrafficAllert RCTA)
01-03-2021:
Module 03: Abs Brakes
coding: Byte 29: was 89 > A8.(A8 is bij Ruben, als test dus)
Stap 2:
Module 03: ABS Brakes
coding: Byte 26 is nu Hex 50.
Blijft hex 50 (Niet aanpassen naar hex F0.)
(bij de TCR staat hex 50)
Stap 3:
Module 17: Dashboard
coding: Byte 5, Bit 3(Lane Chng Assist Installed): 0 > 1.
coding: Byte 11, Bit 3(Lane Chng Assist info BAP Installed): 0 > 1.
Nog te checken: Coding: Blind spot detection: No > Yes
Module 76: Park/Steer Park
coding: Byte 3, Bit 6(Park/Steer assist installed): 0 > 1.
coding: Byte 3, Bit 7(Ausparkassistent) 0 > 1 nog te doen...
Stap 4:(ALLEEN COMBINATIE MET LANE ASSIST, heb ik dus)
Module A5: Driver Assistents
coding: Byte 11, Bit 4(Blind Spot Detection) not coded > coded.
Staat nu op hex 44, wordt dan 54.bij Ruben Ook!